Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2015 Honda Pilot

Model: Honda Pilot YF4, YF3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

Today, you will learn how to reset the oil light on a 2015 Honda Pilot. To reset the light, turn on the ignition and press the button located on the left side of the instrument cluster to start reading the current mileage.

Release the button and press it a second time to begin updating the mileage. Once the mileage has been set, restart the instrument cluster.

If the reset does not occur, you may need to check the oil level sensor by scanning the vehicle at a shop.


Posted on 16 April 2026 by ScegliAuto


Related tutorials

How to Reset the Engine Oil Light on the Honda Pilot
How to Reset the Engine Oil Light on the Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) Below are the instructions needed to reset the maintenance light for the engine oil change on the Honda Pilot. First, get inside the vehicle and star…
How to Reset the Engine Oil Change Light on a Honda Pilot
How to Reset the Engine Oil Change Light on a Honda Pilot
Honda Pilot (2016-2023 / YF6, YF5) In just a few minutes, we will see how to reset the maintenance service light for the engine oil change on a Honda Pilot. First, get in the vehicle a…
How to Reset the Oil Light on the Honda Pilot
How to Reset the Oil Light on the Honda Pilot
Honda Pilot (2009-2015 / YF4, YF3) In this guide, you will learn the steps to manually reset the oil light on the instrument panel of your Honda Pilot. First, get in the driver's seat …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos