Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Light on the Honda Civic?

Model: Honda Civic MK 10 - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the tyre light on the Honda Civic, a very simple and quick operation to perform only after restoring the correct pressure in each tyre according to the instructions in the manual. First, go inside the vehicle, then insert the key and turn on the instrument panel.

Next, access the general menu on the touchscreen display, go to "Settings", "Vehicle", "TPMS Calibration", and select "Calibrate". At this point, just confirm the reset and drive a few miles.


Posted on 31 August 2026 by ScegliAuto


Related tutorials

Honda Civic (2022-2026 / FL, FE, MK 11) In this tutorial, you will learn how to reset the tyre warning light on the Honda Civic, a very simple and quick operation. Before proceeding, ensure…
Honda Civic (2016-2021 / MK 10) On the Honda Civic, resetting the Tyre Pressure Monitoring System (TPMS) is done with the vehicle stationary, with pressures adjusted to the values i…
Honda Civic (2016-2021 / MK 10) Today's instructions will show us how to reset the tire pressure warning of the Honda Civic; before resetting the TPMS sensors, it is necessary for a…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos