Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a Honda Civic

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight bulb

See other generations:
Video tutorial

Replacing the front headlamp bulbs on a Honda Civic? Let’s go through the disassembly of the components. Lift the front bonnet and detach the water reservoir located next to the headlamp.

Once you find the inspection cap of the headlamp (located at the back of the headlamp), remove it. Pull out the bulb holder from the headlamp and extract the damaged bulbs with the help of a screwdriver. Install the new bulbs (always ensure they are the correct type and size).

Close the headlamp with the inspection cap. Test the lights to ensure they are functioning correctly. Don’t forget to reattach the liquid reservoir.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on a Honda Civic
How to Replace the Front Headlight Bulbs on a Honda Civic
Honda Civic (2006-2012 / MK 8) Here’s how to replace the front headlight bulbs on a Honda Civic: open the bonnet by pulling the lever located at the bottom right of the dashboard a…
Replacing the Front Bulb on a Honda Civic
Replacing the Front Bulb on a Honda Civic
Honda Civic (2006-2012 / MK 8) In this very simple video guide, you will learn how to remove and replace the front headlight bulb on a Honda Civic. First, open the bonnet and locat…
How to Replace the Headlight Bulb on a Honda Civic MK9
How to Replace the Headlight Bulb on a Honda Civic MK9
Honda Civic (2012-2015 / MK 9) Watch this short video to learn how to dismantle and replace the headlight bulb on a ninth series Honda Civic in simple steps. First, open the bonnet…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos