Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Wheel Bolts

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

In this video, you will see how to replace the bolts of a wheel. The job is very simple and quick, taking only a few minutes.

It is advisable to lift the vehicle using a hydraulic lift or, more simply, a jack. Remove the bolt using a suitable spanner or an air impact gun set to counter-clockwise rotation, and insert the replacement bolt, tightening it. Perform this operation for each of the four wheels of the car. If you choose to use an air impact gun, ensure each bolt is tightened to 108 Nm of torque.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

Honda Civic (2001-2006 / MK 7) Wheel bearings are part of a car's suspension. They are located on the wheel hub and help reduce friction between parts when the vehicle is in motion…
Honda Civic (2006-2012 / MK 8) In this tutorial, you will see how to replace the horn on a Honda Civic, which requires removing the front bumper. First, lift the front of the car, …
Honda Civic (2006-2012 / MK 8) This guide provides step-by-step instructions to remove and replace the front bumper of the Honda Civic. First, lift the vehicle with axle stands and…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos