Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Horn on a Honda Civic?

Model: Honda Civic MK 8 - Years 2006-2012
Part: Checks and maintenance

In this tutorial, you will see how to replace the horn on a Honda Civic, which requires removing the front bumper. First, lift the front of the car, taking all necessary precautions. Next, remove the lower retaining clips, unscrew the bolts located inside the wheel arch, take off the upper panel of the engine bay, and remove the screws underneath it. Once this is done, grasp the bumper and disengage it from the frame. At this point, you can unscrew the mounting bolts of the horn, remove it from the bracket, and fit the replacement by following the reverse procedure.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Honda Civic
How to Replace the Key Battery of a Honda Civic
Honda Civic (2016-2021 / MK 10) Start by pressing the rear button of the key for your Honda Civic to extract the physical emergency key. Next, using the emergency key as a lever, pr…
How to Remove the Window Winder Handle on a Honda Civic
How to Remove the Window Winder Handle on a Honda Civic
Honda Civic (1995-2001 / MK 6) Before you can start, open the door of your Honda Civic. Begin by inserting a thin but sturdy tool into the gap between the window winder handle and …
How to Replace the Front Headlight Bulb on a 2017 Honda Civic
How to Replace the Front Headlight Bulb on a 2017 Honda Civic
Honda Civic (2016-2021 / MK 10) Replacing the front headlight bulb on your 2017 Honda Civic takes just a few minutes. By following the steps in this guide, you will have no difficul…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos