Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wheel Bearings

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Bearing

See other generations:
Video tutorial

Wheel bearings are part of a car's suspension. They are located on the wheel hub and help reduce friction between parts when the vehicle is in motion.

The first step is to loosen the bolts and lift the wheel with a jack for better access to the components where the bearings are housed. Use a socket to remove the nuts, then detach the caliper using a screwdriver.

Remove the shields and take off the disc, usually with a few taps from a rubber mallet. After this, you can unscrew the bolts and remove the old hub. Once the spacers are detached and the internal circuits are cleaned, you can proceed to install the new bearings.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Rear Wheel Bearing Replacement
Rear Wheel Bearing Replacement
Honda Civic (2001-2006 / MK 7) Obtain replacement bearings. Lift the vehicle, secure it, and remove the wheel. Remove the metal cover protecting the retaining bolt on the hub, whic…
Replacing the Car Wheel
Replacing the Car Wheel
Honda Civic (2001-2006 / MK 7) This guide shows how anyone can replace their car wheel. There are precautions you can take to avoid this problem, or at least reduce the risk, such …
Front Bumper Replacement
Front Bumper Replacement
Honda Civic (2001-2006 / MK 7) Using a ratchet spanner, start removing the screws inside the engine bay. Lift the vehicle on a ramp and unscrew all the screws; the anchor points ar…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos