Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Wheel Hub Bearing on a Honda Civic 6

Model: Honda Civic MK 6 - Years 1995-2001
Part: Bearing

In today's tutorial, you will learn how to replace the rear wheel hub bearing on a Honda Civic of the 6th generation produced from 1995 to 2001. Start by lifting the car and removing the wheel where the bearing needs to be replaced. Once the wheel is off, remove the drum brake cover and finally take off the bearing cap. After that, unscrew the central nut with a 32mm socket, allowing you to replace the old wheel hub with a new one. Now, simply reassemble everything to complete the job.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Civic (2001-2006 / MK 7) Here are step-by-step instructions to remove and replace the front wheel bearing on the Honda Civic. First, raise the vehicle and remove the front wh…
Honda Civic (1995-2001 / MK 6) This video shows you how to replace the rear wheel bearing on a Honda Civic. First, lift the car with a jack. Use a power tool to remove the wheel nu…
Honda Civic (2001-2006 / MK 7) Obtain replacement bearings. Lift the vehicle, secure it, and remove the wheel. Remove the metal cover protecting the retaining bolt on the hub, whic…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos