Do it yourself
| ||||
|
Honda Civic - Video tutorial
Model: Honda Civic
MK 6
- Years 1995-2001 This video shows you how to replace the rear wheel bearing of a Honda Civic. First you need to jack up the car. Using the screwdriver, unscrew the wheel nuts and remove it. Now it is necessary to remove the small circular cover of the drum hub; to do this you can help yourself by using a hammer and a screwdriver that will act as a chisel. During this operation it is best to apply the handbrake to prevent the hub from turning. You will then need to release the handbrake if you want to remove the drum. With a compressor it is better to clean the inside of the drum from dust. To unscrew the hub nut you will need a screwdriver with a 19 mm socket. After unscrewing the hub nut, the old bearing and the washer placed around the nut can be removed. Now you can finally insert the new bearing (not forgetting to reposition the washer around the hub nut) reinsert the nut and screw it back on. The new bearing is mounted!
Posted on 1 July 2023 by ScegliAuto
Other guides that may interest you |
How to open the Honda Sh 125 saddle when the battery is lowLet's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |