Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Rear Wheel Bearing Replacement

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Bearing

See other generations:
Video tutorial

Obtain replacement bearings. Lift the vehicle, secure it, and remove the wheel.

Remove the metal cover protecting the retaining bolt on the hub, which will then need to be unscrewed. If you encounter difficulties, use some penetrating spray.

Use a puller to remove the disc to access the bearing. Remove the bearing's retaining circlip and use a puller to free the bearing.

Clean thoroughly from old grease. Then, position the new bearing inside after greasing it well.

Refit all the spacers previously removed.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Replacing the Rear Wheel Hub Bearing on a Honda Civic 6
Replacing the Rear Wheel Hub Bearing on a Honda Civic 6
Honda Civic (1995-2001 / MK 6) In today's tutorial, you will learn how to replace the rear wheel hub bearing on a Honda Civic of the 6th generation produced from 1995 to 2001. Star…
How to Replace a Rear Wheel Bearing
How to Replace a Rear Wheel Bearing
Honda Civic (1995-2001 / MK 6) This video shows you how to replace the rear wheel bearing on a Honda Civic. First, lift the car with a jack. Use a power tool to remove the wheel nu…
How to Replace the Front Wheel Bearing on the Honda Civic
How to Replace the Front Wheel Bearing on the Honda Civic
Honda Civic (2001-2006 / MK 7) Here are step-by-step instructions to remove and replace the front wheel bearing on the Honda Civic. First, raise the vehicle and remove the front wh…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos