Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Replacement

Model: Honda Civic MK 7 - Years 2001-2006
Part: Front bumper

Using a ratchet spanner, start removing the screws inside the engine bay. Lift the vehicle on a ramp and unscrew all the screws; the anchor points are distributed around the bumper, underneath the vehicle, and behind the wing. You can now gently remove the entire bumper. Start by lifting one corner and then disengage all the plastic retaining clips. To fit the new bumper, proceed in reverse order. After positioning the bumper at the front of the vehicle, push firmly on the edges to engage the plastic clips. Refit all the screws.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of the Honda Civic
Removing the Front Bumper of the Honda Civic
Honda Civic (2006-2012 / MK 8) This guide provides step-by-step instructions to remove and replace the front bumper of the Honda Civic. First, lift the vehicle with axle stands and…
Removing the Front Bumper of the Honda Civic 6
Removing the Front Bumper of the Honda Civic 6
Honda Civic (1995-2001 / MK 6) This guide provides the main instructions for removing and replacing the front bumper of the sixth series Honda Civic. First, open the bonnet and sta…
Front Headlamp Bulb Replacement
Front Headlamp Bulb Replacement
Honda Civic (1995-2001 / MK 6) For replacing the front headlamp bulb, there is not much room to manoeuvre, and especially for the driver's side headlamp, it is necessary to remove …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos