Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of the Honda Civic 6

Model: Honda Civic MK 6 - Years 1995-2001
Part: Front bumper

This guide provides the main instructions for removing and replacing the front bumper of the sixth series Honda Civic. First, open the bonnet and start by unscrewing the screws located at the top of the front bumper; unscrew the additional screws found underneath the bumper and on both sides of the front wheel arches, as shown in the video. At this point, remove the plastic clips from the bumper grille; gently unclip the bumper from the sides, removing it and replacing it, if necessary, with the new one, applying the reverse procedure!

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper of the Honda Civic
Removing the Front Bumper of the Honda Civic
Honda Civic (2006-2012 / MK 8) This guide provides step-by-step instructions to remove and replace the front bumper of the Honda Civic. First, lift the vehicle with axle stands and…
Removing the Front Bumper of the Honda Civic
Removing the Front Bumper of the Honda Civic
Honda Civic (2006-2012 / MK 8) The following steps will show you the procedure for removing and replacing the front bumper of the Honda Civic. First, move to the front of the vehic…
Replacing the Front Headlight of the Honda Civic 6
Replacing the Front Headlight of the Honda Civic 6
Honda Civic (1995-2001 / MK 6) Today, in this video tutorial, you will learn how to remove and replace the front headlight of the sixth series Honda Civic, following the instructio…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos