Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Service warning light

After each oil change on your car, you need to perform a quick reset of the warning light so that it does not illuminate at every start. This is a standard procedure that also applies to the 2010 Honda CR-V, and in this mini guide, you will learn how to do it. First, insert the key and turn it to position two. Start the dashboard and press the button located below the speedometer several times until you see the oil life information on the mini display. At this point, press and hold the same button for a few seconds. As soon as the new screen appears, release it and turn it clockwise. Press it once, and when the display starts to flash, hold it down again for a few more seconds. Finally, release it and turn off the dashboard.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Honda CR-V 2022
How to Reset the Oil Light on a Honda CR-V 2022
Honda CR-V (2017-2022 / MK 5) In this new mini guide, we will discover how to manually reset the engine oil light on your new Honda CR-V fifth generation (2022 model). First, you …
How to Reset the TPMS Light on a 2025 Honda CR-V
How to Reset the TPMS Light on a 2025 Honda CR-V
Honda CR-V (2023-2026 / MK 6, RS) Resetting the tyre pressure monitoring system on the new Honda CR-V is a simple and quick task to perform independently. Once the tyre pressures are …
How to Reset the Service on a Honda CR-V?
How to Reset the Service on a Honda CR-V?
Honda CR-V (2017-2022 / MK 5) In this tutorial, you will see how to reset the oil service on a Honda CR-V. This operation is very simple and quick, and should only be performed af…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos