Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Front Number Plate Holder on a Honda Accord

Model: Honda Accord MK 10 - Years: 2018, 2019, 2020, 2021, 2022, 2023

See other generations:
Video tutorial

In today's video, see how to install the front number plate holder on the current series of the Honda Accord. Remember to be careful with the collision radar, as covering it may cause it to malfunction.

We can now proceed with the installation. Here are the main steps.

Position the number plate holder in the desired location and temporarily secure it with tape. Now, drill holes in the bumper to install the support screws.

Install the number plate by screwing in the appropriate fixing screws. Remove the tape and you're done.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Number Plate from a Honda Accord
How to Remove the Front Number Plate from a Honda Accord
Honda Accord (2008-2013 / MK 8) Before you can start, exit the cabin of your Honda Accord and head to the front of the car. Begin by unscrewing and removing the screws that secure t…
How to Replace the Radiator Fan on a Honda Accord
How to Replace the Radiator Fan on a Honda Accord
Honda Accord (2002-2007 / MK 7) Before you start, open the bonnet of your Honda Accord. Begin by disconnecting the hoses connected to the radiator fan, then unplug the electrical co…
How to Replace the Front Grille of the Honda Accord?
How to Replace the Front Grille of the Honda Accord?
Honda Accord (2008-2013 / MK 8) To replace the front grille of the Honda Accord, open the bonnet to access the screws securing the grille at the front of the engine bay. Remove the …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos