Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Honda Accord Mk5

Model: Honda Accord MK 5 - Years: 1993, 1994, 1995, 1996, 1997, 1998
Part: Fuel filter

See other generations:
Video tutorial

This guide shows how to replace the fuel filter on a Honda Accord Mk5. This component is located on the right side of the engine bay. Using a 19 mm and a 17 mm spanner, secure the filter assembly and undo the 17 mm bolt. Now, you can detach the hydraulic line located on top of the filter.

From underneath the vehicle, using a 19 mm and a 14 mm spanner, undo the retaining bolt for the second hydraulic line. Remove the 10 mm securing bolt of the filter assembly and extract it. Remove the filter bracket and install the new cartridge.

Replace the seals and refit everything in position. Perform four ignition cycles of the vehicle's electrical system to fill the new filter, and the check engine light should turn off.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to replace the fuel filter in the Honda Accord?
How to replace the fuel filter in the Honda Accord?
Honda Accord (1998-2002 / MK 6) In this tutorial, we can see how to replace the fuel filter in the Honda Accord, a very simple and quick operation. First of all, we open the tank ca…
How to replace the air filter on a Honda Accord
How to replace the air filter on a Honda Accord
Honda Accord (2018-2023 / MK 10) To replace the air filter on a Honda Accord, open the bonnet to access the engine compartment. The air filter is located on the right side of the eng…
How to Replace the Fuel Pump in a Honda Accord?
How to Replace the Fuel Pump in a Honda Accord?
Honda Accord (1998-2002 / MK 6) In this tutorial, see how to replace the fuel pump in a Honda Accord, a very simple and quick operation. First, ensure the key is not in the ignition…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos