Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Shock Absorber on a Honda Civic

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Shocks

See other generations:
Video tutorial

To replace the rear shock absorber on a Honda Civic, lift the vehicle so that the corresponding wheel is not in contact with the ground. Once the vehicle is raised, loosen the wheel fastening bolts and completely remove the wheel to access the components at the rear.

You can then unscrew the bolt that secures the shock absorber at the bottom; to loosen the one at the top, open the boot and unscrew it from inside the boot. After removal, install the new replacement part.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Honda Civic (2006-2012 / MK 8) This video shows how to replace the front shock absorbers. First, locate the upper nut of the shock absorber under the wiper arm fixing nut; once loc…
Honda Civic (2001-2006 / MK 7) Lift the vehicle on a hydraulic lift, remove the rear wheel, and access the boot by removing the side carpet lining to reach the fastening bolts of t…
Honda Civic (2001-2006 / MK 7) For this operation, only an 18mm socket spanner is needed. Remove the wheel and unscrew the nut that secures one end of the shock absorber to the veh…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos