Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Accord
    4. : How to program a new remote control for Honda Accord?

Honda Accord - Video tutorial

Model: Honda Accord MK 7 - Years 2002-2007
Part: Key
Operation: How to program a new remote control for Honda Accord?

In this tutorial, we can see how to program a new remote control for the Honda Accord, which is a very simple and quick operation. First of all, we need to go inside the car using a working remote control, then we insert the key of the one to be programmed into the ignition switch, bring it to the second position, wait for a second, and press the unlock button of the locks. Then we wait for another second, turn off the ignition, and repeat the same operation for 3 consecutive times. Once we have done this, we test the new remote control by locking and unlocking the locks.


Posted on 18 April 2023 by ScegliAuto



How to program a new remote control in the Honda Accord?
Honda Accord (1998-2002 / MK 6) In this tutorial we can see how to program a new remote control in the Honda Accord, a very simple and quick operation. To do this, we will obviously
How to lower the windows with the use of the remote key on Honda Accord
Honda Accord (2008-2013 / MK 8) In this tutorial we are going to see how to lower the windows with the use of the remote key only on Honda Accord. To program the key for this type o
How to replace the Honda Accord remote control battery?
Honda Accord (2018-2023 / MK 10) Replacing the Honda Accord remote control battery, as we can see in this tutorial, is an extremely simple and fast operation. To do this, we will not

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos