Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the muffler on the Husaberg FE 450?

Model: Husaberg Fe 450
Part: Exhaust muffler

Video tutorial

The replacement of the muffler on the Husaberg FE 450 can be carried out by loosening the screws that secure the terminal to its housing, corresponding to the right side of the rear fender: first, the connecting clamp positioned between the muffler and the collector must be removed.

Then, you can proceed by loosening the screws that secure the muffler to its supports, so that it can then be completely removed: once it has been removed, you can proceed to insert the new one, which must be properly installed and its operation verified.


Posted on 10 January 2026 by ScegliAuto


Related tutorials

How to Replace the Camshaft on the Husaberg FE 450?
How to Replace the Camshaft on the Husaberg FE 450?
Fe 450 To replace the camshaft on the Husaberg FE 450, loosen the screws that secure the side covers of the bike, which protect the engine block on the left…
How to Replace the Spark Plug on the Husaberg FE 450?
How to Replace the Spark Plug on the Husaberg FE 450?
Fe 450 To replace the spark plug on the Husaberg FE 450, locate the coil on the right side of the bike, just behind the radiator: once the coil is disconnec…
How to Change the Engine Oil on a Husaberg FE 450
How to Change the Engine Oil on a Husaberg FE 450
Fe 450 To change the engine oil on the Husaberg 450 FE, loosen the drain plug located at the bottom centre of the bike's oil sump. Once the plug is removed,…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos