Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Air Filter on Husaberg 550

Model: Husaberg 550 Fe
Part: Air filter

Video tutorial

Unscrew the bolt that secures the seat and remove it. Voila! You are now facing the sought-after air filter. Unscrew the butterfly screw that secures it and pull it out. If the filter is still in good condition, you can simply clean it using a compressed air gun and then wet it with water and a cleaning product of your choice.

If it is in poor condition, it is advisable to replace it, as the cost of the part is not prohibitive and the installation is extremely simple. Insert it back in place, screw it in, then reassemble the seat and you're done.

Good luck!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Change the Battery of the Husaberg 550 FE
How to Change the Battery of the Husaberg 550 FE
550 Fe In today's guide, you will see the main steps to remove and replace the battery of a 2008 Husaberg 550 FE. First, remove the seat of your motorcycle …
How to Remove the Engine from a Husaberg 550 FE?
550 Fe To remove the engine from a Husaberg 550 FE, you need to loosen the bolts securing the engine block to the supports. Once the engine block is freed, …

How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?

In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat, then take off both side panels by unscrewing the respective screws and unscrew the two bolts located at the front of the fuel tank. Next, lift the tank, support it with a rope if necessary, and remove the top cover of the airbox. At this point, extract the old filter, clean the inside of the housing from any dirt residue, and fit the new part by reversing the procedure.

Watch the video!


by ScegliAuto

More videos