Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Valves on a Husaberg FE 450?

Model: Husaberg Fe 450
Part: Valve

Video tutorial

To adjust the valves on the Husaberg FE 450, first loosen all the bolts securing the seat and remove the seat itself. Next, remove the fairing section that contains the air filter, located just below the handlebars.

Use feeler gauges to adjust the valves according to the thickness indicated in the motorcycle's user and maintenance manual. Tighten or loosen the valve as needed.

Once the check is complete, reassemble all previously removed parts.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on the Husaberg FE 450?
How to Replace the Spark Plug on the Husaberg FE 450?
Fe 450 To replace the spark plug on the Husaberg FE 450, locate the coil on the right side of the bike, just behind the radiator: once the coil is disconnec…
How do you replace the muffler on the Husaberg FE 450?
How do you replace the muffler on the Husaberg FE 450?
Fe 450 The replacement of the muffler on the Husaberg FE 450 can be carried out by loosening the screws that secure the terminal to its housing, correspondi…
How to Replace the Camshaft on the Husaberg FE 450?
How to Replace the Camshaft on the Husaberg FE 450?
Fe 450 To replace the camshaft on the Husaberg FE 450, loosen the screws that secure the side covers of the bike, which protect the engine block on the left…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos