Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cover on the Husaberg FE 450?

Model: Husaberg Fe 450
Part: Drivetrain

Video tutorial

To replace the clutch cover on the Husaberg FE450, loosen the bolts securing it to its housing, located on the right side at the bottom of the bike. Once the bolts are loosened, you can completely detach the cover from its housing, giving you access to the underlying clutch.

After the old cover is removed, position the new one in its place and secure it with the appropriate bolts. After installation, check that everything functions correctly.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Husaberg FE 450
How to Replace the Clutch on a Husaberg FE 450
Fe 450 To replace the clutch on the Husaberg FE 450, loosen the screws securing the cover located on the lower centre of the right side of the bike. Once th…
How to Replace the Clutch Cover on Husaberg FE 450
How to Replace the Clutch Cover on Husaberg FE 450
Fe 450 In this video, see how to disassemble and replace the clutch cover on a Husaberg FE 450 and 570 enduro bike in simple, quick steps. First, position t…
How to Replace the Clutch on a Husaberg FE 450
How to Replace the Clutch on a Husaberg FE 450
Fe 450 To replace the clutch on a Husaberg FE 450, start by loosening the bolts that secure the clutch cover, located at the bottom of the right side of the…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos