Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front shock absorber springs on the Husqvarna TE 300i?

Model: Husqvarna Te 300i
Part: Shocks

Video tutorial

To replace the front shock absorber springs on the Husqvarna TE 300i, you will need to loosen the screws located at the top of the fork. This will allow you to completely remove the handlebars and access the components inside the fork.

Here, you will find the springs that can be extracted from their housing. At this point, you can install the new replacement parts, thus sealing the forks.

After reinstalling the handlebars, you will be able to check that everything is functioning correctly.


Posted on 18 December 2025 by ScegliAuto


Related tutorials

How to replace the bulb and front headlight of the Husqvarna TE 300i.
How to replace the bulb and front headlight of the Husqvarna TE 300i.
Te 300i These brief and simple steps will show us how to disassemble and replace the front headlight of the Husqvarna TE 300i enduro motorcycle. First of all…
How to Replace the Front Headlight on a Husqvarna Te 300i
How to Replace the Front Headlight on a Husqvarna Te 300i
Te 300i In this short and simple guide, learn how to remove and replace the front headlight or its dipped beam bulb on the Husqvarna Te 300i enduro bike. Fir…
How to dismantle the rear suspension of the Husqvarna TE 300i
How to dismantle the rear suspension of the Husqvarna TE 300i
Te 300i Today's guide will illustrate the main steps to dismantle and replace the rear suspension of the Husqvarna TE 300i enduro bike. First, lift the bike …

How to Replace the Spark Plug on a Kymco AK 550

Today, let's discover the steps to remove and replace the spark plug of the Kymco AK 550 scooter engine. First, place the scooter on the centre stand and disconnect the electrical connector of the spark plug, then unscrew the fixing screws to remove the cap. Use a socket wrench with an extension to unscrew and remove it, as shown in the video. Now, install the new spark plug of the correct type and with the same thread pitch, screw it in by hand and then tighten gently with the wrench; finally, reconnect the spark plug connector!

Watch the video!


by ScegliAuto

More videos