Do it yourself
Frequently asked questions about cars and motorcycles
Replace the oil and engine filter on a Husqvarna TE510. Follow this guide video for the replacement procedure. Position the motorcycle on a stand; using a spanner, unscrew the bolt of the oil sump (drain the fluid into a container). Unscrew the oil filter (remove the metal cover). Remove the worn oil filter kit and fit a new one after cleaning it (tighten the screws of the housing cap). Finally, top up the new fluid in the engine and close with the plastic cap. Test the motorcycle's proper functioning.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Yzf R125 .. Perform maintenance on your Yamaha R125, replacing oil and engine filter on a Husqvarna TE510. Follow this guide video for the replacement procedure... …
701 Sm Below, discover the steps that will allow you to carry out the routine maintenance service by replacing the engine oil and oil filter on the Husqvarn…
Fe 450 Below are the instructions that will allow you to carry out the routine maintenance service by replacing the engine oil and oil filter on the Husqvar…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos