Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Engine Oil and Oil Filter on Husqvarna SM 610

Model: Husqvarna Sm 610
Part: Engine oil

Video tutorial

In today's video, you will learn how to replace the engine oil and oil filter while performing the regular maintenance service on a Husqvarna SM 610 enduro bike. First, warm up the engine for a few minutes, then unscrew the oil drain bolt located under the engine using a 12 mm spanner; allow it to drain into a container for about ten minutes.

Next, unscrew the screws of the oil filter cover using an 8 mm socket spanner, and replace the filter with the original spare part; finally, pour in the new engine oil!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Replace the Flywheel on the Husqvarna SM 610?
How to Replace the Flywheel on the Husqvarna SM 610?
Sm 610 To replace the flywheel on the Husqvarna SM 610, position a tray under the bike to collect the used oil: this will be expelled from the drain plug, w…
How do you disassemble the engine of the Husqvarna SM 610?
How do you disassemble the engine of the Husqvarna SM 610?
Sm 610 In order to disassemble the engine of the Husqvarna SM 610, you need to loosen the screws that secure it to its housing in the center of the frame, s…
How to replace the exhaust on a Husqvarna SM 610?
How to replace the exhaust on a Husqvarna SM 610?
Sm 610 To replace the exhaust on a Husqvarna SM 610, you need to loosen the screws that secure the exhaust to its housing on the left side of the bike, near…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos