Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exhaust on a Husqvarna SM 610?

Model: Husqvarna Sm 610
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a Husqvarna SM 610, you need to loosen the screws that secure the exhaust to its housing on the left side of the bike, near the mudguard. By loosening the support screws and widening the ring that connects the exhaust tip to the manifold, you can remove the old exhaust from its position and insert a new one. Once the new exhaust is properly positioned, secure it with the appropriate screws to its supports and insert the ring that connects it to the manifold, ensuring it functions correctly.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Replace the Flywheel on the Husqvarna SM 610?
How to Replace the Flywheel on the Husqvarna SM 610?
Sm 610 To replace the flywheel on the Husqvarna SM 610, position a tray under the bike to collect the used oil: this will be expelled from the drain plug, w…
How to Replace Engine Oil and Oil Filter on Husqvarna SM 610
How to Replace Engine Oil and Oil Filter on Husqvarna SM 610
Sm 610 In today's video, you will learn how to replace the engine oil and oil filter while performing the regular maintenance service on a Husqvarna SM 610 …
How do you disassemble the engine of the Husqvarna SM 610?
How do you disassemble the engine of the Husqvarna SM 610?
Sm 610 In order to disassemble the engine of the Husqvarna SM 610, you need to loosen the screws that secure it to its housing in the center of the frame, s…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos