Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Flywheel on the Husqvarna SM 610?

Model: Husqvarna Sm 610
Part:

Video tutorial

To replace the flywheel on the Husqvarna SM 610, position a tray under the bike to collect the used oil: this will be expelled from the drain plug, which you will need to unscrew with the appropriate tool. Next, open the cover containing the flywheel by loosening the relevant bolts.

At this point, you can remove the flywheel using a pneumatic gun to loosen its central pin. Once the old flywheel has been removed, insert the new flywheel and secure it to its central pin. Finally, close the protective cover and the oil drain plug.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How do you disassemble the engine of the Husqvarna SM 610?
How do you disassemble the engine of the Husqvarna SM 610?
Sm 610 In order to disassemble the engine of the Husqvarna SM 610, you need to loosen the screws that secure it to its housing in the center of the frame, s…
How to replace the exhaust on a Husqvarna SM 610?
How to replace the exhaust on a Husqvarna SM 610?
Sm 610 To replace the exhaust on a Husqvarna SM 610, you need to loosen the screws that secure the exhaust to its housing on the left side of the bike, near…
How to Replace Engine Oil and Oil Filter on Husqvarna SM 610
How to Replace Engine Oil and Oil Filter on Husqvarna SM 610
Sm 610 In today's video, you will learn how to replace the engine oil and oil filter while performing the regular maintenance service on a Husqvarna SM 610 …

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos