Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Husqvarna Supermoto 701

Model: Husqvarna 701 Sm
Part: Antifreeze coolant

Video tutorial

In this brief guide, discover how to replace the coolant or antifreeze in the Husqvarna Supermoto 701 enduro bike. First, place the bike on its stand and begin draining the antifreeze; to do this, unscrew the screw located on the water pump cover, allowing the fluid to drain into a container, as shown in the video.

At this point, unscrew the radiator cap to top up with the new coolant, ensuring it is the correct type for your radiator, filling to the appropriate level!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Husqvarna 701 Supermoto?
How to Change the Engine Oil in the Husqvarna 701 Supermoto?
701 Sm In this tutorial, you will learn how to change the engine oil in the Husqvarna 701 Supermoto, a very simple and quick operation to perform every 620 …
How to Replace the Rear Brake Pads on a Husqvarna 701 Supermoto
How to Replace the Rear Brake Pads on a Husqvarna 701 Supermoto
701 Sm In this video tutorial, you will learn how to remove and replace the rear brake pads on a Husqvarna 701 Supermoto in simple and quick steps. First, r…
How to Change the Engine Oil and Oil Filter on the Husqvarna 701 Supermoto
How to Change the Engine Oil and Oil Filter on the Husqvarna 701 Supermoto
701 Sm This short video will show the steps to perform routine maintenance by changing the engine oil and oil filter on the Husqvarna 701 Supermoto. First, …

How to Replace the Rev Sensor on a Benelli TNT 600

This guide provides instructions on how to remove and replace the engine rev sensor on a Benelli TNT 600 motorcycle by following these simple steps. First, place your motorcycle on a stand and disconnect the electrical connector of the rev sensor located on the left side engine cover; then use a socket spanner with an extension to unscrew and remove the bolt, as shown in the video. At this point, remove and replace the rev sensor, installing the original part to ensure proper functioning, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos