Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to change the engine oil in the Husqvarna 701 Supermoto, a very simple and quick operation to perform every 620 miles. First, wait for the engine to cool down sufficiently, then position a container underneath it. Locate the drain bolt and loosen it with a 13 mm socket spanner. Next, remove the secondary filter, extract it, and clean any dirt residue inside. Continue by extracting and replacing the main filter, reassemble everything, and pour in the required amount of oil through the designated upper hole.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on the Husqvarna 701 Supermoto
How to Change the Engine Oil and Oil Filter on the Husqvarna 701 Supermoto
701 Sm This short video will show the steps to perform routine maintenance by changing the engine oil and oil filter on the Husqvarna 701 Supermoto. First, …
How to Replace the Coolant in the Husqvarna Supermoto 701
How to Replace the Coolant in the Husqvarna Supermoto 701
701 Sm In this brief guide, discover how to replace the coolant or antifreeze in the Husqvarna Supermoto 701 enduro bike. First, place the bike on its stand…
How to Replace the Rear Brake Pads on a Husqvarna 701 Supermoto
How to Replace the Rear Brake Pads on a Husqvarna 701 Supermoto
701 Sm In this video tutorial, you will learn how to remove and replace the rear brake pads on a Husqvarna 701 Supermoto in simple and quick steps. First, r…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos