Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Husqvarna Svartpilen 401

Model: Husqvarna Svartpilen 401
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a Husqvarna Svartpilen 401, loosen the bolt that secures the clamp connecting the exhaust to the rest of the exhaust system. Once the clamp is loosened, disconnect the exhaust from the system and remove the bolt that secures the exhaust to the rear of the bike.

After removing this bolt, you can detach the old exhaust and replace it with a new part: the new exhaust will be connected to the system with the clamp and secured to the rear of the bike with the bolt.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust of the Husqvarna Svartpilen 401?
How to Replace the Exhaust of the Husqvarna Svartpilen 401?
Svartpilen 401 To replace the exhaust of the Husqvarna Svartpilen 401, loosen the bolts securing the exhaust end can to its supports, located near the rear wheel an…
How do you replace the exhaust pipe of the Husqvarna Svartpilen 401?
How do you replace the exhaust pipe of the Husqvarna Svartpilen 401?
Svartpilen 401 The exhaust terminal of the Husqvarna Svartpilen 401 can be replaced by loosening the screw that closes the connection ring between the muffler and t…
How to Replace the Exhaust on the Husqvarna Svartpilen 401
How to Replace the Exhaust on the Husqvarna Svartpilen 401
Svartpilen 401 To replace the exhaust on the Husqvarna Svartpilen 401, loosen the bolts securing the exhaust at both the top and bottom. First, unscrew the bolt tha…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos