Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cylinder Head Assembly of the Husqvarna Wre 125

Model: Husqvarna Wre 125

Video tutorial

Today, you will learn how to remove and replace the cylinder head assembly of the Husqvarna Wre 125 enduro bike. First, place your bike on a stand and disconnect the coolant hose, allowing it to drain into a container.

Next, remove the spark plug and unscrew the bolts from the cylinder head to take it off, as shown in the video. At this point, remove the cylinder and then take out the piston by disconnecting the metal clip and removing the pin. Check the condition of the crankshaft and refit the new cylinder head assembly!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Piston on the Husqvarna TE 250
How to Replace the Piston on the Husqvarna TE 250
Te 250 This guide outlines the steps to disassemble and replace the piston of the engine assembly on the Husqvarna TE 250 enduro bike. First, place the bike…
How to Replace the Piston on a KTM EXC 125
How to Replace the Piston on a KTM EXC 125
Exc 125 In today's video, you will see how to disassemble and replace the piston of the engine assembly on a KTM EXC 125 two-stroke motorcycle. First, remove…
How to Replace the Cylinder Head Assembly of the Lml Star 125
How to Replace the Cylinder Head Assembly of the Lml Star 125
Star 125 In this video tutorial, you will learn how to remove the cylinder head assembly, which includes the cylinder head, cylinder, and piston, of the Lml S…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos