Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Husqvarna Svartpilen 401

Model: Husqvarna Svartpilen 401
Part: Antifreeze coolant

Video tutorial

This guide shows you how to replace the coolant or antifreeze in the Husqvarna Svartpilen 401 and 701, as well as the Vitpilen. First, place the motorcycle on its centre stand and start by unscrewing the drain screw for the antifreeze located at the bottom of the water pump casing; allow the fluid to drain into a container for about ten minutes.

At this point, unscrew the filler cap of the reservoir and top up with new antifreeze; use the fluid suitable for your radiator, filling it up to the maximum level mark.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in a Husqvarna Svartpilen 401
How to Replace the Coolant in a Husqvarna Svartpilen 401
Svartpilen 401 Below are the instructions for draining and subsequently refilling the coolant in the Husqvarna Svartpilen 401 motorcycle, as well as the Vitpilen. F…
How to Replace the Air Filter on a Husqvarna Svartpilen 401
How to Replace the Air Filter on a Husqvarna Svartpilen 401
Svartpilen 401 To replace the air filter on a Husqvarna Svartpilen 401, insert the ignition key into the lock located on the left side of the bike to release the se…
How to Replace the Exhaust of the Husqvarna Svartpilen 401?
How to Replace the Exhaust of the Husqvarna Svartpilen 401?
Svartpilen 401 To replace the exhaust of the Husqvarna Svartpilen 401, loosen the bolts securing the exhaust end can to its supports, located near the rear wheel an…

How to Replace the Shaft Seals on the GasGas EC 125?

To replace the shaft seals on the GasGas EC 125, loosen the nut that secures the sprocket, located on the left side of the bike. Once the sprocket is removed, moving the chain as well, you can locate the shaft seals positioned at the bottom of the sprocket. Using a tool like a screwdriver, pry out the old seals from their housing and replace them with new spare parts. After replacement, reinstall the sprocket and the corresponding chain, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos