Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Chain, Sprocket, and Pinion on a Husqvarna FX 350

Model: Husqvarna Fx 350
Part:

Video tutorial

Today's instructions will show you the main steps to disassemble and replace the chain, sprocket, and pinion on the Husqvarna FX 350 enduro bike. First, place the bike on a stand and begin by removing the rear wheel by unscrewing the central axle.

Then, disconnect the chain and proceed to unscrew the bolts of the sprocket, removing it from the rim as shown in the video. At this point, unscrew the bolts of the pinion to remove and replace it, thus also replacing the drive chain; then reassemble the transmission compatible with your engine!


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to change the engine oil on the Husqvarna FX 350
How to change the engine oil on the Husqvarna FX 350
Fx 350 Learn how to perform the first service maintenance by changing the engine oil on the Husqvarna FX 350 enduro bike. First, place the bike on a stand a…

How to Reset the Engine Warning Light on a Sym Jet 14 125?

To reset the engine warning light on the Sym Jet 14 125, connect a diagnostic tool to the vehicle's OBD port: this port is located under the internal fairing at the front of the scooter. Once the scanner is connected, identify the source of the error that causes the warning light to illuminate: this way, you can address and resolve it. When the operation is complete, turn on the instrument panel again, noting that the engine warning light has been reset and will not illuminate again.

Watch the video!


by ScegliAuto

More videos