Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Hyosung
    3. : Exiv 250

How to Replace the Starter Motor on a Hyosung Exiv 250?

Model: Hyosung Exiv 250
Part: Starter motor

Video tutorial

To replace the starter motor on a Hyosung Exiv 250, loosen the screws securing the motor to its housing, located centrally beneath the rear shock absorber. Once the mounting screws are loosened, disconnect the connectors and remove the motor from its housing.

This will allow you to fit the new starter motor in its place. Secure it to the mounts with the appropriate screws, reconnect the connector, and ensure everything functions correctly.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor of the Sherco SE 250
Replacing the Starter Motor of the Sherco SE 250
Se 250 This guide provides instructions for removing and replacing the starter motor of the Sherco SE 250 enduro bike. First, place the bike on the stand an…
How to Replace the Starter Motor on a Ktm XC 250
How to Replace the Starter Motor on a Ktm XC 250
Xc 250 In this video tutorial, you will see instructions on how to remove and replace the starter motor on the Ktm XC 250 two-stroke enduro bike. First, rem…
How to Replace the Starter Motor on a KTM Duke 250
How to Replace the Starter Motor on a KTM Duke 250
Duke 250 Let’s briefly go through the steps necessary to remove and replace the starter motor on a KTM Duke 250 motorcycle. First, remove the seat and disconn…

How to Change the Time on a Yamaha R7

The procedure to change the time displayed on your Yamaha R7 dashboard is quite simple. With the following guide, you will be able to complete it without any difficulty. First, locate the "Res" and "Sel" buttons on the left-hand dial and hold down the "Res" button. At the same time, turn on the ignition and wait for the hour to start flashing. At this point, release the "Res" button and press "Sel" multiple times to change the hour digit. Next, switch to minutes by pressing "Res" and repeat the same procedure.

Watch the video!


by ScegliAuto

More videos