Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Ktm XC 250

Model: Ktm Xc 250
Part: Starter motor

Video tutorial

In this video tutorial, you will see instructions on how to remove and replace the starter motor on the Ktm XC 250 two-stroke enduro bike. First, remove the plastic cover on the left side of the engine by unscrewing all the screws to access the starter motor; then unscrew the additional screws of the starter motor, disconnect the electrical connector to remove it and replace it with the new one, as shown in the video.

At this point, install the new starter motor by applying the reverse procedure of disassembly!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to replace the transmission oil seal on the KTM XC 250
How to replace the transmission oil seal on the KTM XC 250
Xc 250 This guide provides the main instructions for removing and replacing the transmission oil seal on the KTM XC 250 enduro bike, as well as the XC-W 250…
How to Replace the Grips on a KTM XC 250
Xc 250 In this short and simple guide, we will cover the steps to remove and replace the grips on the handlebars of the KTM XC 250 enduro bike. First, place…
Replacing Front Brake and Clutch Levers on KTM XC 250
Xc 250 In this guide, you will learn how to remove and replace the brake and clutch levers on a KTM XC 250. First, remove the protective rubber from the lev…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos