Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Ix25 Creta
  6. : 2019-2024 (MK 2)

Hyundai Ix25 Creta Years 2019-2024 (MK 2)

Hyundai Ix25 Creta (2019-2024 / MK 2)
How to reset the multimedia system in the Hyundai IX25?

In the Hyundai IX25, it is possible for the multimedia system to freeze or show signs of malfunction. In these cases, we can try to solve the problem by …read all…
Posted on 26 July 2023 by ScegliAuto
Hyundai Ix25 Creta (2019-2024 / MK 2)
How to change the battery on a Hyundai Ix25.

If we have realized that the battery of our car has run out and we want to proceed with a DIY replacement, in the description below we have provided all the …read all…
Posted on 12 May 2023 by ScegliAuto
Hyundai Ix25 Creta (2019-2024 / MK 2)
Location and diagram of the fuses on the Hyundai Ix25 Creta

The main fuse box in the passenger compartment of this car is located in the lower part of the dashboard on the right side of the steering wheel near the …read all…
Posted on 14 April 2023 by ScegliAuto
Hyundai Ix25 Creta (2019-2024 / MK 2)
How to install a shark fin antenna in the Hyundai Ix25 Creta?

In the Hyundai Ix25 Creta we can install a shark fin antenna instead of the factory antenna. The latter must be removed by unscrewing it and the bodywork …read all…
Posted on 5 August 2022 by ScegliAuto
Hyundai Ix25 Creta (2019-2024 / MK 2)
How to replace the remote control battery of the Hyundai IX25 Creta

In today's video we will see how to replace the key battery in the Hyundai ix25. We disassemble the body of the key in two parts, using a pointed object such …read all…
Posted on 6 May 2024 by ScegliAuto
Hyundai Ix25 Creta (2019-2024 / MK 2)
How to reset the service light on the Hyundai IX25 Creta

In the following mini guide concerning the Hyundai ix25 Creta we will find out how to correctly reset the service (or maintenance) light of the car. First …read all…
Posted on 30 April 2024 by ScegliAuto
Antenna (1) Car stereo (2) Battery (1) Key (1) -board computer (2) Checks and maintenance (2) Cabin air filter (2) Door panel (1) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos