Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Shark Fin Antenna on the Hyundai Ix25 Creta

Model: Hyundai Ix25 Creta MK 2 - Years 2019-2026
Part: Antenna

On the Hyundai Ix25 Creta, you can install a shark fin antenna in place of the factory antenna. First, remove the factory antenna by unscrewing it and carefully clean the surrounding bodywork before installing the new antenna, as it may not adhere properly otherwise. Take the new shark fin antenna, remove the protective film, and if desired, use a hairdryer to soften the adhesive at its base. Screw the new antenna cable onto the roof of the car and finally, stick the antenna onto the bodywork. You can then turn on the car radio to check that everything is working properly.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Hyundai IX25 Creta
How to Reset the Service Light on the Hyundai IX25 Creta
Hyundai Ix25 Creta (2019-2026 / MK 2) In this mini guide for the Hyundai IX25 Creta, you will learn how to correctly perform a manual reset of the service light (or maintenance light) on …
How to Replace the Cabin Air Filter on a Hyundai Ix25 Creta
How to Replace the Cabin Air Filter on a Hyundai Ix25 Creta
Hyundai Ix25 Creta (2014-2020 / MK 1) This guide provides the main instructions for replacing the cabin air filter on a Hyundai Ix25 Creta. First, get inside the vehicle on the passenger …
How to Replace the Factory Radio in the Hyundai Ix25 Creta
How to Replace the Factory Radio in the Hyundai Ix25 Creta
Hyundai Ix25 Creta (2014-2020 / MK 1) Today, learn how to remove and replace the factory radio with a new multimedia system in the Hyundai Ix25 Creta, in simple steps. First, get inside t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos