Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of the Hyundai IX25 Creta

Model: Hyundai Ix25 Creta MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Door trim panel

See other generations:
Video tutorial

Today's guide shows you how to remove the front door panel of the Hyundai IX25 Creta. First, open the front door of your car and start removing the small plastic caps located on the panel itself, as well as on the sides and near the opening handle; then, unscrew the screws found underneath, as shown in the video.

Now, pry the sides of the panel to detach and remove it, disconnecting the electrical connector and the handle cable; all that's left is to reassemble everything by applying the reverse procedure!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on a Hyundai Ix25 Creta
How to Replace the Cabin Air Filter on a Hyundai Ix25 Creta
Hyundai Ix25 Creta (2014-2020 / MK 1) This guide provides the main instructions for replacing the cabin air filter on a Hyundai Ix25 Creta. First, get inside the vehicle on the passenger …
How to Reset the Service Light on the Hyundai IX25 Creta
How to Reset the Service Light on the Hyundai IX25 Creta
Hyundai Ix25 Creta (2019-2026 / MK 2) In this mini guide for the Hyundai IX25 Creta, you will learn how to correctly perform a manual reset of the service light (or maintenance light) on …
How to Replace the Factory Radio in the Hyundai Ix25 Creta
How to Replace the Factory Radio in the Hyundai Ix25 Creta
Hyundai Ix25 Creta (2014-2020 / MK 1) Today, learn how to remove and replace the factory radio with a new multimedia system in the Hyundai Ix25 Creta, in simple steps. First, get inside t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos