Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Factory Radio in the Hyundai Ix25 Creta

Model: Hyundai Ix25 Creta MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

See other generations:
Video tutorial

Today, learn how to remove and replace the factory radio with a new multimedia system in the Hyundai Ix25 Creta, in simple steps. First, get inside the vehicle and start by removing the side plastic panel of the radio, including the air vents, using a thin tool to pry it off; then, disconnect the factory multimedia system by unplugging the electrical connector located at the back, as shown in the video.

At this point, install the new radio, making the necessary wiring modifications, following the video tutorial to the end!


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Install a Shark Fin Antenna on the Hyundai Ix25 Creta
How to Install a Shark Fin Antenna on the Hyundai Ix25 Creta
Hyundai Ix25 Creta (2019-2026 / MK 2) On the Hyundai Ix25 Creta, you can install a shark fin antenna in place of the factory antenna. First, remove the factory antenna by unscrewing it an…
How to Replace the Cabin Air Filter on a Hyundai Ix25 Creta
How to Replace the Cabin Air Filter on a Hyundai Ix25 Creta
Hyundai Ix25 Creta (2014-2020 / MK 1) This guide provides the main instructions for replacing the cabin air filter on a Hyundai Ix25 Creta. First, get inside the vehicle on the passenger …
How to Remove the Front Door Panel of the Hyundai IX25 Creta
How to Remove the Front Door Panel of the Hyundai IX25 Creta
Hyundai Ix25 Creta (2014-2020 / MK 1) Today's guide shows you how to remove the front door panel of the Hyundai IX25 Creta. First, open the front door of your car and start removing the s…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos