Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Hyundai Reina Verna - Key

Hyundai Reina Verna (2017-2024 / MK 1)
How to replace the key battery on the Hyundai Reina Verna.
As we can see in the video tutorial, replacing the battery of the Hyundai Reina remote control is an easy operation to perform. To do this, we will need a …read all…
Posted on 26 May 2023 by ScegliAuto
Hyundai Reina Verna (2017-2024 / MK 1)
How to change the battery of the key on the Hyundai Reina Verna.
If we have noticed that the remote control key for our car no longer opens the doors and unlocks the central locking, we must proceed to replace the battery …read all…
Posted on 15 April 2023 by ScegliAuto
Hyundai Reina Verna (2017-2024 / MK 1)
How to replace the remote control battery of Hyundai Verna?
In this tutorial we can see how to replace the Hyundai Verna remote control battery. For this quick and easy operation we will need a flat tip screwdriver and …read all…
Posted on 6 November 2022 by ScegliAuto
Hyundai Reina Verna (2017-2024 / MK 1)
How to replace the remote control battery of Hyundai Reina?
As we can see in this tutorial, replacing the Hyundai Reina remote control battery is an extremely simple and fast operation. To do this, we will need a …read all…
Posted on 5 May 2024 by ScegliAuto
Loudspeaker (1) Car stereo (2) Bodywork (1) Key (4) Headlight (1) Cabin air filter (2) Rear light bulb (1) Gear Shift Knob (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos