Do it yourself
Frequently asked questions about cars and motorcycles

Four methods to reset the TPMS pressure light on a Hyundai.

Model: Hyundai Hyundai Various
Part: Tire pressure warning light

In this video we see four functional methods to turn off the TPMS light on a Hyundai vehicle: the simplest system is to inflate the tires to the pressure indicated on the label attached to the driver's door thickness and then drive a short distance at a constant speed, in order to reset it. If this does not work, some models have a specific button to reset this function, located just below the steering column, to be pressed with the ignition on but without the engine running; the light will flash three times and then we can drive normally. If our model does not have this button, we can slightly overinflate our tires, then deflate them completely and reinflate them to the recommended pressure: this process forces the system to detect pressure changes and triggers the warning light. The last method is to reset the vehicle's computer via the battery, by disconnecting the positive battery cable, leaving it disconnected for about three minutes: this completely disconnects the car's ECU and allows a forced restart of all the car's electronics. If none of these methods work then it is a problem with the sensors or a problem that cannot be solved on your own.

Posted on 16 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Hyundai Hyundai Various The TPMS light on the 2024 Hyundai Creta activates on the instrument panel when it is necessary to adjust the tyre pressure. The light can activate u…
Hyundai Hyundai Various In this video we can see how to check the tire pressure on most Hyundai vehicles: first of all, we take as reference the pressure indicated on the pl…
Hyundai Hyundai Various Many vehicles produced by Hyundai can reset the tire pressure warning light using the button located under the left dashboard. When the light comes o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos