Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Hyundai I20 key remote control

Model: Hyundai I20 MK 1, PB - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

Today's information will show us how to disassemble and replace the battery of the key remote for the Hyundai I20. First, we take our remote and begin to remove the plastic back cover, using something thin and pointed to pry on the side; then we remove the battery that we find inside, as shown in the video.

At this point, we replace the remote's battery with a new one of the correct type (in this case a CR 2032 3V); insert it in the correct direction and secure the plastic cover, then test the functioning of the commands.


Posted on 16 June 2025 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery in a Hyundai i20
How to Replace the Key Fob Battery in a Hyundai i20
Hyundai I20 (2020-2026 / MK 3, BC3) To change the battery in the key fob of a Hyundai i20, press the release button and extract the emergency key. Use the same key or a flat screwdriver…
How to Replace the Key Battery for Hyundai I20
How to Replace the Key Battery for Hyundai I20
Hyundai I20 (2014-2021 / IB, MK 2, GB) Is the battery in your Hyundai I20 key dead? Want to replace it? Here's how to disassemble the key. Take the remote key and separate the piece: remov…
Replacement of the battery of the Hyundai I20 key remote.
Replacement of the battery of the Hyundai I20 key remote.
Hyundai I20 (2014-2021 / IB, MK 2, GB) Today we will discover how to disassemble and replace the battery of the Hyundai I20 key remote. First, take the remote in hand and start by removing…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos