Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the purpose of the fuse diagram for the 2009 Hyundai Atos?

Model: Hyundai Atos MK 1 - Years 1997-2008
Part: Fuse box

Fuse diagrams are of fundamental importance, without them it would be very complicated to locate the position of each fuse inside the fuse boxes. This diagram or schematic is contained in the vehicle's user manual, as well as retrievable online, if necessary, in PDF format. But where are the aforementioned fuse boxes located in the vehicle in question? The first one is in the pedal area, under the steering wheel, while the second one is inside the engine compartment, on the right side of the power battery, covered by a plastic panel.

Posted on 19 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Fuse Box Location and Diagram for the Hyundai Atos
Fuse Box Location and Diagram for the Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) This guide shows the location of the fuse box and where to find the diagram for the Hyundai Atos. First, open the bonnet and remove the plastic cover…
Fuse Box Location on Hyundai Atos
Hyundai Atos (1997-2008 / MK 1) On the Hyundai Atos, as well as many other Hyundai models and others, there are two fuse boxes: the first is located under the bonnet on the left sid…
What is the Fuse Box Diagram for the Hyundai Atos?
What is the Fuse Box Diagram for the Hyundai Atos?
Hyundai Atos (1997-2008 / MK 1) In this video, we can see where the fuse boxes of the Hyundai Atos are located and their respective diagrams, useful if you need to check the fuses o…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos