Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Boot on a Hyundai Sonata

Model: Hyundai Sonata DN8 - Years 2020-2026
Part: Checks and maintenance

Today, we will go through the steps to open a stuck boot, such as in the case of a flat battery, on a Hyundai Sonata. First, open the left rear door of the vehicle and start removing the plastic cap found at the bottom next to the seat; then pull the release cable for the boot lock to open it from the outside, as shown in the video. At this point, replace the battery or repair the boot lock, ensuring it functions correctly.

Posted on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the antenna in the Hyundai Sonata?
How to replace the antenna in the Hyundai Sonata?
Hyundai Sonata (2015-2019 / LF) In this tutorial, we can see how to replace the antenna in the Hyundai Sonata, an extremely simple and quick operation. First of all, we open the rea…
How to Replace the Wheel on the Hyundai Sonata
How to Replace the Wheel on the Hyundai Sonata
Hyundai Sonata (2010-2015 / YF, MK 6) In today's video tutorial, we will see step-by-step instructions on how to remove and replace the wheel with the spare on the Hyundai Sonata. First, …
How to Remove the Rear Seat and Bench of the Hyundai Sonata
How to Remove the Rear Seat and Bench of the Hyundai Sonata
Hyundai Sonata (2010-2015 / YF, MK 6) Today's guide will show you how to dismantle and replace the rear seats and bench of the Hyundai Sonata. First, open the rear doors of your car and s…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos