Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the On-Board Computer in a Hyundai i30?

Model: Hyundai I30 MK 3, PD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Onboard computer

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the on-board computer in a Hyundai i30, an extremely simple and quick operation to perform, for example, as a troubleshooting attempt or after a change of ownership. First, go inside the cabin, then insert the key and turn on the instrument panel.

Next, access the general menu by pressing the appropriate button located to the right of the display, go to "System info", "Default", and confirm your choice. At this point, just wait for the system to restart and check that any issues are resolved.


Posted on 8 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2022 Hyundai i30
How to Reset the Service Light on the 2022 Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) Resetting the service light on the 2022 Hyundai i30 is very simple and can be done independently. This reset is performed after each service, whether…
How to perform a factory data reset on the Hyundai I30
How to perform a factory data reset on the Hyundai I30
Hyundai I30 (2016-2024 / MK 3, PD) The following video tutorial shows us the steps to follow to reset the onboard computer of the 2022 Hyundai I30 to factory settings. To perform this …
How to reset the onboard computer in the Hyundai I30?
How to reset the onboard computer in the Hyundai I30?
Hyundai I30 (2011-2016 / GD, MK 2) .. In this tutorial we can see how to reset the onboard computer in the Hyundai I30, an extremely simple and quick operation, to be.. …

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos