Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to do if the TPMS light stays on in a Hyundai even after inflating the tyres

Model: Hyundai Elantra CN7, MK 7 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

If the TPMS light remains on in a Hyundai even after inflating the tyres, try this quick method before going to the garage. Check all four wheels with a reliable pressure gauge and inflate them to the pressure indicated on the driver's side door jamb label (not the value printed on the sidewall of the tyre).

Once the pressures are correct, start the vehicle and drive normally: on many Hyundai models, the TPMS system updates automatically after a short drive. If the light stays on solid or flashes, do not continue to reset it: there may be a slow leak, a faulty sensor, or another issue with the TPMS system.

In that case, check the pressures, follow the reset procedure, and if that doesn't help, consult a technician.


Posted on 25 September 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on the 2018 Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) To reset the TPMS light related to the tyre pressures on your 2018 Hyundai Elantra, you do not need any tools. First, park the car on a flat surface …
What the TPMS Light Indicates on the 2016 Hyundai Elantra
What the TPMS Light Indicates on the 2016 Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) The tyre pressure warning light or TPMS light on the 2016 Hyundai Elantra indicates that it is time to adjust the tyre pressures. This operation, inc…
Reset the TPMS Warning Light on the Hyundai Elantra MK6
Reset the TPMS Warning Light on the Hyundai Elantra MK6
Hyundai Elantra (2015-2020 / MK 6) This guide shows how to reset the tyre pressure monitoring system (TPMS) warning light on a sixth-generation Hyundai Elantra. Before starting this pr…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos