Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Handle on Elantra

Model: Hyundai Elantra MK 4, HD - Years: 2006, 2007, 2008, 2009, 2010
Part: Handle

See other generations:
Video tutorial

Want to remove the door handle? Here’s how to take off the external handle from a Hyundai Elantra door. Open the door, remove any cover caps, and unscrew the screw located at the side of the door with a screwdriver: remove the left or right cover of the handle (key cylinder), then slide the handle out to remove it. Prepare to fit the new external handle, then secure the handle, followed by the side cover.

Screw in the handle screw to complete the installation. Don’t forget to install the cylinder and the screw cover cap.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Cabin Fan on a Hyundai Elantra
Instructions for Removing the Cabin Fan on a Hyundai Elantra
Hyundai Elantra (2006-2010 / MK 4, HD) In this video tutorial, you will find the main instructions on how to remove the cabin fan from a Hyundai Elantra. First, get inside the car on the p…
How to Remove the Driver's Door on the Hyundai Elantra?
How to Remove the Driver's Door on the Hyundai Elantra?
Hyundai Elantra (2010-2015 / MK 5, MD, UD) In this tutorial, see how to remove the driver's door on the Hyundai Elantra, a very simple and quick operation. First, open the door in question, th…
How to Change the Spark Plugs of the Hyundai Elantra
How to Change the Spark Plugs of the Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In this short and simple guide, see how to remove and replace the engine spark plugs of the Hyundai Elantra, following the instructions below. First,…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos