Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : How to change the spark plugs of the Hyundai Elantra

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Spark plugs
Operation: How to change the spark plugs of the Hyundai Elantra

Let's see in this short and simple guide how to remove and replace the spark plugs of the Hyundai Elantra engine, following the instructions below. First we open the engine hood and start by removing the upper plastic bulkhead; after which we remove the coils of our spark plugs, unscrewing the screws with a socket wrench, as shown in the video. Now we use a socket wrench with extension to unscrew our spark plugs, replacing them with new ones (with the same pitch and the same thermal gradation); screw them by hand and then tighten with a key!


Posted on 1 May 2024 by ScegliAuto



How to replace the spark plugs in a Hyundai Elantra.
Hyundai Elantra (2010-2015 / UD, MK 5, MD) Below we will see the steps that will allow us to disassemble and replace the engine spark plugs of the Hyundai Elantra. First, we open the engine ho
How to remove the spark plugs on a Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) Let's see in this video how to remove the spark plugs on a Hyundai Elantra. We pull the lever of the engine compartment opening and raise the front h
How to remove the spark plugs of a Hyunda Elantra
Hyundai Elantra (2015-2020 / MK 6) How to disassemble the spark plugs of a Hyunda Elantra? Let's see how to intervene: open the engine compartment and lift the front hood; we secure an

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos