Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Hyundai Elantra

Model: Hyundai Elantra MK 5, MD, UD - Years: 2010, 2011, 2012, 2013, 2014, 2015
Part: Spark plugs

See other generations:
Video tutorial

Below are the steps to remove and replace the spark plugs on a Hyundai Elantra. First, open the bonnet and start unscrewing the screws securing the four spark plug connectors using a socket wrench with an extension; then disconnect the four electrical connectors, as shown in the video.

At this point, use the wrench to unscrew the four spark plugs; then install the new spark plugs, ensuring they are the correct type and have the same thread pitch, screwing them in by hand before tightening gently with the wrench.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Change the Spark Plugs of the Hyundai Elantra
How to Change the Spark Plugs of the Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In this short and simple guide, see how to remove and replace the engine spark plugs of the Hyundai Elantra, following the instructions below. First,…
How to Remove the Spark Plugs of a Hyundai Elantra
How to Remove the Spark Plugs of a Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) How to remove the spark plugs of a Hyundai Elantra? Let's see how to proceed: open the engine bay and lift the front bonnet; secure and disconnect th…
How to Remove Spark Plugs on a Hyundai Elantra
How to Remove Spark Plugs on a Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In this video, see how to remove the spark plugs on a Hyundai Elantra. Pull the lever to open the engine compartment and lift the front bonnet, secur…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos