Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spark Plugs of a Hyundai Elantra

Model: Hyundai Elantra MK 6 - Years 2015-2020
Part: Spark plugs

How to remove the spark plugs of a Hyundai Elantra? Let's see how to proceed: open the engine bay and lift the front bonnet; secure and disconnect the battery terminals for safety. Remove the soundproofing cover panel, then use a screwdriver or pliers to remove the coils from the engine head; immediately after, unscrew the spark plugs with a socket wrench and pull them out of the head using a long socket. Take the new spark plugs and guide them into the engine head with the extension of the socket wrench, tighten them, and connect the power coils to each spark plug. Close the engine bonnet and test their proper functioning.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs on a Hyundai Elantra
How to Replace the Spark Plugs on a Hyundai Elantra
Hyundai Elantra (2010-2015 / MD, UD, MK 5) Below are the steps to remove and replace the spark plugs on a Hyundai Elantra. First, open the bonnet and start unscrewing the screws securing the f…
How to Change the Spark Plugs of the Hyundai Elantra
How to Change the Spark Plugs of the Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In this short and simple guide, see how to remove and replace the engine spark plugs of the Hyundai Elantra, following the instructions below. First,…
How to Remove Spark Plugs on a Hyundai Elantra
How to Remove Spark Plugs on a Hyundai Elantra
Hyundai Elantra (2015-2020 / MK 6) In this video, see how to remove the spark plugs on a Hyundai Elantra. Pull the lever to open the engine compartment and lift the front bonnet, secur…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos