Do it yourself
Frequently asked questions about cars and motorcycles

Resetting Service Light on Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

Turn on the instrument cluster (not the engine). Press the main button (the one at the top) on your right on the steering wheel to enter the menu.

Scroll through the various sections until you reach the vehicle settings: press the OK button to enter that page. Continue scrolling through the sections until you reach the maintenance page.

Enter this page, press and hold the OK button for several seconds until the reset occurs. At this point, you can return to your preferred page.

Turn off the car and restart to verify that the reset has been completed.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Hyundai Kona (2017-2023 / MK 1) In this brief video guide, we will see how to reset the service light on a 2020 Hyundai Kona, first-generation model produced from 2017 to 2020. Star…
Hyundai Kona (2017-2023 / MK 1) In today's video, you will learn how to perform a service reset on a Hyundai Kona, first generation model produced from 2017 to 2023. Start the opera…
Hyundai Kona (2017-2023 / MK 1) To reset the Service light on the Hyundai Kona, turn on the instrument panel by turning the ignition key. Once the panel is on, navigate through the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos