Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Interior Light on a Hyundai

Model: Hyundai Hyundai Various
Part: Interior dome light bulb

Video tutorial

How to remove the interior light in the car? Let’s see how to take off the interior light to replace the damaged bulb inside. Pry between the cover of the interior light and the lens (without breaking the lens).

Pull the lens out from the interior light, then remove the bulbs/LEDs and replace them with new ones (same size and voltage). Reattach the lens after replacement.

If you want to replace the entire interior light: unscrew the retaining screws. Fix the interior light into the cover panel (push it with your hands until the plastics are fully secured), connect the electrical connector, and test the light’s proper functioning.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to reset the service light of the Hyundai Creta
How to reset the service light of the Hyundai Creta
Hyundai Hyundai Various To manually reset the service light of your Hyundai Creta, you just need to carefully read the following guide and follow the few simple steps descri…
Removing the Rear Cabin Light Bulb on a Hyundai Veracruz
Removing the Rear Cabin Light Bulb on a Hyundai Veracruz
Hyundai Hyundai Various Today's instructions will show you how to remove and replace the rear cabin light bulb on a Hyundai Veracruz. First, get into the vehicle from the re…
How to reset the TPMS light on a Hyundai.
How to reset the TPMS light on a Hyundai.
Hyundai Hyundai Various Many vehicles produced by Hyundai can reset the tire pressure warning light using the button located under the left dashboard. When the light comes o…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos